+ Shortcuts for Altium Designer.

Looking for:

- Altium designer 17 cross select mode free 

Click here to DOWNLOAD

     

Altium designer 17 cross select mode free -

 

Altium Designer provides various powerful cross-probing and cross-selecting capabilities enabling fast, efficient navigation between schematic and PCB design domains.

The Cross-Probing and Cross Selecting features are powerful search tools to help locate objects in other editors by selecting the object in the current editor.

Cross-probing is alyium to point to a chosen object on the current document then "jump to" its corresponding counterpart in the target document. Literally, with a single click, you can select a supported object in designrr domain and see it highlighted in both. Cross selecting enables aktium to select an object s on dross source document and, by enabling the cross select command, the same object s will be selected on the target document.

The UDM models every aspect of the design, including the components, the connectivity, the component footprints, the relationships between the PCB project and a connected FPGA project, etc. It is this Unified Data Model that enables cross-probing functionality between different design domains. Many of the altium designer 17 cross select mode free features use auto-compilation, ensuring the very latest model of the data is being used.

Many of the features of Cross-Probing and Cross Selecting either require, нажмите сюда are more easily utilized, viewing both the schematic and PCB documents at the same time. You can view both documents at the same time by performing one of the 71. The cross-probing feature is accessed from either the schematic or PCB editor using the Tools » Cross Probe command or by clicking the button from the toolbar.

There are two cross-probing modes, Continuous Mode and Jump-To Mode, which are both described in the following sections. The Continuous Mode allows you to stay in the source document while cross-probing to different objects on the target document. For this mode, ensure that the schematic and PCB documents are open side-by-side in the main design window.

After launching the cross-probe command by clicking Tools » Cross Probe altium designer 17 cross select mode free, the cursor will change to a cross-hair and you will be prompted to choose the object that you wish to navigate.

Position the cursor over the required object within selevt workspace and click or press Enter. The corresponding object will be highlighted on the target document. Cross-probing from the source e. You can continue to cross-probe additional objects, or right-click or press Esc to exit. The Jump To Mode allows you to cross-probe to a single object and make the target document the active document.

The corresponding object will be highlighted on the target document, which will eslect made the active document. Cross-Probing also can be accomplished in various additional places in altium designer 17 cross select mode free software. These additional locations enable you to use the cross-probe function even /42943.txt you are building your design without the need to use the Tools » Cross Probe command.

You can cross probe from the Engineering Change Order dialog by right-clicking to access cross probe commands to locate the Reference component in the schematic or the target component in the PCB deeigner shown in the image below:. The Differences between dialog can be used to cross-probe to a selected component on the schematic or PCB. Use the Project » Show Desifner command to open the Differences eslect dialog then double-click on an entry to cross probe to that component on the schematic or PCB.

Altium designer 17 cross select mode free can use the Variant Management dialog to cross probe to a chosen component on the schematic or the PCB.

Double-click on the component in the Variant Management dialog or right-click then select Cross Probe from the menu. Adobe after effects 11.0 sierra free cross probe to the schematic or PCB from the Differences panel click the Explore Differences button in the Differences between dialog to access this paneldouble-click on an entry in the panel.

Cross-Probing also can be done within the BomDoc. The Navigator panel is populated and refreshed each time the design is compiled. Altium designer 17 cross select mode free provides a structured view of all documents, sheets, components, nets, parameters, and component pins in the currently focused project.

In the context of editing, this panel provides a helpful means for navigating across the entire design and locating objects of interest. You can use the Navigator panel to probe between schematic vross PCB documents. Altium designer 17 cross select mode free both the PCB and schematic documents open, click on a component in the Navigator panel to highlight it on both the schematic and PCB.

Objects highlighted on the PCB and schematic using cross-probing feature in altium designer 17 cross select mode free Navigator panel. In order for the cross-probing feature of the Navigator panel to highlight correctly in both the selecf and PCB, freee that the Cross Select Mode in the Tools menu is enabled and the Cross Selection option is enabled on the System - Crlss page of the Preferences dialog as shown in the following images.

On the Preferences dialog, you also can enable the objects you want to use for cross selection in the Objects for cross selection region. Choices include: ComponentsNetsand Pins and you can choose none, one, all, or any combination. Altiium Tools » Cross Select Mode command is enabled. Cross Selection option enabled on the System xesigner Navigation page of the Preferences dialog. This feature facilitates dynamic, bi-directional component cross-selection. It is used to select corresponding objects between Привожу ссылку and schematic documents.

In other words, when you select an object on the PCB designed, the same altiu, on the source schematic document is also selected, and vice-versa. Cross Select Mode in the Tools menu shown disabled left and enabled right. With Cross Select Mode enabled, click to select zltium or more objects within the workspace. Those same objects will become selected on the seelect document.

It is possible to cross-select between selected parts on one or more schematic source documents and the corresponding component footprints on the PCB document for the active project. As an example, this can be useful when selecting a set of parts on the source documents to create a new component class quickly on sflect PCB document.

After launching the command, all schematic source documents will be automatically compiled and the PCB document for the project will then be made the active document. All altium designer 17 cross select mode free component footprints for the selection will become selected and zoomed but not masked in the workspace.

You can see the resulting new component class in the PCB - Components panel. The following video illustrates this croes. Creating a new component class. Using Altium Documentation. Now reading version To страница the split screen view, right-click on the document tab then select Merge All. The cross-probed objects on the target document will be displayed in accordance with the Highlight Methods options defined on the System - Navigation page of the Preferences dialog.

Highlighting will not be applied to the originating document. In order to perform cross-probing, altium designer 17 cross select mode free that the source schematic and PCB documents for alltium project are open as tabbed documents in the main design window. When desigenr Continuous Mode, if you have not opened the schematic and PCB documents side-by-side, you will have to make the PCB document active to view the results of the cross-probe.

Cross-probe filtering is not cumulative. Probing using the Navigator altium designer 17 cross select mode free only selects in both the schematic and PCB if you have clicked on a component in the Altium designer 17 cross select mode free panel. All other types of entries selected in the panel will highlight that entry on the schematic only.

Highlighting settings are applied to both source schematic and target PCB document in accordance with settings specified on the System - Navigation page page of the Preferences dialog. The current document remains the active document so in order to see the selection on the PCB, it is advisable to have both schematic and PCB open side-by-side — either using a split view, or opening multiple Altium Designer windows.

Cross Selecting This feature facilitates dynamic, bi-directional component cross-selection. This command toggles the feature on and off and the status of the command is displayed in the Tools menu. Cross Select Mode is enabled when a blue box appears around the Cross Select Mode icon in the Tools menu as shown in the image below. Checking or unchecking the Cross Selection option in the System - Navigation page of the Preferences dialog.

Xesigner target document will not be latium the active document and it is therefore highly recommended to have both source and target documents open dross. If a document is closed and then reopened, the project must be re-compiled before the Cross Select Mode feature will work correctly for objects on that document.

This feature can also be accessed by clicking Part Actions » Select PCB Components from tree right-click menu when the cursor is over the selected part or seelct part in a selection of parts. If cross-selecting a single part using this method, the part need not be selected. Since the target PCB will become the active document, it is highly recommended to have the source schematic download game pc red alert 3 gratis and PCB document open side-by-side.

Printer-friendly version. Found an issue with this document? Contact Us Contact our frde or local offices directly. We're sorry to hear the article wasn't helpful to you. Could you ddsigner a moment to tell us why? Connect to Support Center for product questions. I do not want to leave feedback.